| 1 편 주 조 |
|---|
|
목공선반
|
||
|
 ☜
 ☜
|
 ☜
|
|
|
|
|
|
 내부가공용 장비 |
|
 Vertilathe
|
|
|
The exciting and inexpensive Vertilathe tool attaches to the table of your drill press. The aluminum base plate with a ball bearing live center performs the function of a tail stock center on a standard lathe. This slotted base, fastens to the drill press table with carriage bolts (supplied) and is aligned with the drill axis. There are two drive centers: A screw center for small diameter work and a spur center for work pieces 3/4 inch in diameter and larger. The adjustable 3 inch and 6 inch stainless steel tool rests mount on either side of the base plate and are adjustable to turn pieces up to 4 inches in diameter and 3 to 6 inches long(12 inches long, if you flip the work piece over). A Forstner bit can also be used in the chuck as a drive center.
|
|
